Install Usb Drivers - Cisco DPC2203C Installation And Operation Manual

Voip cable modem
Table of Contents

Advertisement

Install USB Drivers

This section contains instructions for installing the cable modem USB drivers if your
PC is equipped with a USB interface and a Microsoft Windows 2000 or Windows XP
operating system. The USB driver installation procedures are different for each
operating system. Follow the appropriate instructions in this section for your
operating system.
Note: If your PC does not have a USB interface, you may skip this section.
Installing USB Drivers on Windows XP Systems
1
Insert the USB Cable Modem Driver Installation Disk into the CD-ROM drive
of your PC.
2
Wait until the POWER and ONLINE LED status indicators on the front panel of
the cable modem illuminate solid green.
3
Select Install from a list or specific location (Advanced) in the Found New
Hardware Wizard window, and then click Next.
4
Select Search removable media (floppy, CD-ROM) in the Found New
Hardware Wizard window, and then click Next.
Click Continue Anyway in the Hardware Installation window to continue the
5
installation. The Found New Hardware Wizard window reopens with a message
that the installation has finished.
6
Click Finish to close the Found New Hardware Wizard window. The USB
drivers are installed on your PC, and your USB devices are ready for use.
7
Try to access the Internet. If you cannot access the Internet, go to
Troubleshooting the Installation (on page 35). If you still cannot access the
Internet, contact your service provider for further assistance.
Installing USB Drivers on Windows 2000 Systems
1
Insert the USB Cable Modem Driver Installation Disk into the CD-ROM drive
of your PC.
2
Wait until the POWER and ONLINE LED status indicators on the front panel of
the cable modem illuminate solid green.
3
Click Next in the Found New Hardware Wizard window.
Select Search for a suitable driver for my device (recommended) in the Found
4
New Hardware Wizard window, and then click Next.
Select CD-ROM drives in the Found New Hardware Wizard window, and then
5
click Next.
Click Next in the Found New Hardware Wizard window. The system searches
6
for the driver file for your hardware device.
72-4017315-01 Rev B

Install USB Drivers

23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents