Kodak Scan Station 500 User Manual page 27

Copies for Printing option
Advanced option
A-61627 November 2008
Copies for Printing — allows you to select the number of copies (1-99)
to print.
• Use the Up and Down arrows to adjust the number of copies, then
click the button to the left of the number to save the new value.
Advanced — provides the following options:
• Blank Image Detection — used to detect blank pages (e.g., the
back side of a document), so these pages can be discarded. Use
this option when scanning black and white documents to either TIFF
or PDF. The default is 1%. Document images that fall below the
percentage will be discarded.
• Multifeed Ultrasonic Detection — multifeed ultrasonic detection
aids in document scanning by detecting documents that may go
through the feeder overlapped. Multifeeds can happen due to
stapled documents, adhesives on documents, or electrostatically
charged documents. Check this option if you want the Scan Station
to detect double-fed documents.
NOTE: If this option is on and a a multifed document is detected,
the Scan Station will "ding". Check your scanned images to
be sure they are correct. If necessary, you may need to
rescan the job.
2-19