Environmental Information; European Union; Battery Information; Acoustic Emission - Kodak Scan Station 500 User Manual

Safety
• Place the Kodak Scan Station 500 on a level work surface capable of supporting 13.6 kgs (30 lbs).
• When placing the Scan Station, make sure that the electrical power outlet is located within 1.52 metres (5 feet) of the Scan
Station and is easily accessible.
• Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.
• Plug the power cord securely into the outlet. Failure to do so may cause electric shock or fire.
• Only use the power cord that is supplied with the scanner. Using any other power cord may cause electrical shock and/or
damage to the product.
• Do not install the scanner in locations that are subject to dust, humidity or steam. This may cause a fire or electrical shock.
• Do not block ventilation ports. This may cause the scanner to overheat which may result in scanner malfunction or fire.
• Do not use the scanner if it becomes unusually hot, has a strange odor, emits smoke, or makes unfamiliar noises. Stop the
scanner immediately and disconnect the power cord. Contact Kodak Service.
• Do not attempt to disassemble or modify the scanner.
• Do not move the scanner with the power cord and cables connected. This may cause damage to the cord/cables. Disconnect
the power cord before moving the scanner.
• Do not damage, knot, cut or modify the power cord. This may result in fire or electrical shock.
• Do not connect the scanner to an extension cord or multi-plug power strip. Use a dedicated power outlet.
• Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds.
When accessing the MSDSs from the website, you will be required to provide the catalog number of the consumable you
want the Material Safety Data Sheet for. See the section entitled, "Supplies and consumables" later in this guide for supplies
and catalog numbers.

Environmental information

• The Kodak Scan Station 500 is designed to meet worldwide environmental requirements.
• Guidelines are available for the disposal of consumable items that are replaced during maintenance or service; follow local
regulations or contact Kodak locally for more information.
• Disposal of this material may be regulated due to environmental considerations. For disposal or recycling information,
contact your local authorities or, in the USA, visit the Electronics Industry Alliance website: www.eiae.org.
• The product packaging is recyclable.
• Parts are designed for reuse or recycling.

European Union

This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate facilities
for recovery and recycling. Please contact your local Kodak representative or refer to www.kodak.com/go/recycle
for additional information on the collection and recovery programs available for this product.

Battery Information

This product contains a Lithium Ion button cell battery. This battery can only be removed or replaced by a qualified Service
Engineer.

Acoustic emission

Maschinenlärminformationsverordnung – 3, GSGV
Der arbeitsplatzbezogene Emissionswert beträgt <70 db(A).
[Machine Noise Information Ordinance — 3, GSGV
The operator-position noise emission value is <70 dB(A).]

Power system connection

This product is also designed for Norwegian IT power system with phase-to-phase voltage 230V.
Netzanschluß
Das Gerät ist auch für die Verwendung im norwegischen IT-Stromsystem mit einer Leiterspannung von 230 V geeignet.
Connexion aux systèmes d'alimentation électrique
Ce produit est également conçu pour les systèmes norvégiens d'alimentation électrique informatique, dont la tension par phase
est de 230 V.
A-61627 November 2008
1-1