Kodak Scan Station 500 User Manual page 12

2-4
2. Do one of the following:
• If you have a USB flash drive with your personal settings, insert
the flash drive in the USB port. Your settings will be displayed on
the touch screen and override the default settings. Proceed with
Step 5.
• If you do not have personal settings, proceed with the next step.
3. From the touch screen, select the destination(s) you want to send
your scanned document(s) to. More than one email address, printer,
network folder, etc. can be selected at a time.
NOTE: If you select a destination that you do not want, select the
item again to uncheck it.
4. If you want to change the scan settings, touch the Settings button
and make the desired changes.
5. Press Go. The Processing Review screen will be displayed.
NOTE: The message "Please wait, lamps are warming up" may
be displayed. Document feeding proceeds after the lamps
warm up.
• If you want to review or change any of your settings, you can
select the Output button and the Settings Review screen will be
displayed.
A-61627 November 2008