Sizing Objects; Use Size Buttons - Brady BBP 85 User Manual

Sizing Objects

Use Size Buttons

®
BBP 85 Label Printer User's Manual
Use this procedure to set the object size. Objects can be sized by using the size
buttons, dragging objects to size or setting object label length and width.
Note: Sizing an object too large may cause it to overlap or cover other objects in
the Editor.
To use the size buttons:
1. In the Editor, select the object you want to resize.
2. In the Toolbar, touch increase
decreasing the object size with the Size buttons results in proportional
resizing only.
Note: For barcode objects, resizing occurs only in the direction of the barcode
bars (usually the vertical direction, unless the barcode has been rotated).
3. Repeat Step 2 until the object is the size you want.
Handling Objects
or decrease button. Increasing or
Sizing Objects
4-29