Handling Objects; Editing Objects; Moving Objects; Drag Objects - Brady BBP 85 User Manual

Handling Objects

Editing Objects

Moving Objects

Drag Objects

®
BBP 85 Label Printer User's Manual
To edit an object, touch the object and then edit it using any of the settings and/or
attributes available in the Control Panel. If you want to change to a different
graphic or barcode, select Change Graphic or Change Barcode, then change
any of the options available in the Barcode or Select Graphic dialogs.
Note: To change the color of a printed graphic, see "Working with Object Colors"
on page 4-10.
Use this procedure to reposition objects on the label. Objects can be positioned
either by dragging, using arrow keys on the keyboard, or by setting specific x- and
y-coordinates. They can also be positioned by aligning them to one of the edges
of the label or centering them either horizontally or vertically on the label.
Note: Objects must be entirely contained within the printable area of the label.
To drag an object:
1. In the Editor, select the object you want to move.
2. Drag the object to the new location.
Notes:
• If you drag an object off the edge of the displayed part of the label (but still
within the label boundary), the display will automatically scroll so the object
stays visible.
• If you move an object so that some or all of the object is outside the
printable area, the object will be repositioned within the label boundary.
3. Repeat Step 2 until the object is where you want it.
Handling Objects
Moving Objects
4-25