Setting Up The Printer; Connect Printer Power - Brady BBP 85 User Manual

Setting up the Printer

Connect Printer Power

®
BBP 85 Label Printer User's Manual
To setup the printer:
1. Plug the power cord into the printer at the location shown [1].
2. Plug the other end of the power cord into an AC power outlet. The printer
automatically turns on and displays the primary Home Page. The size and
color of the currently installed media and other status indicators are shown.
Note: If there is no ribbon or media installed, the system defaults to black
ribbon and 10 in. [254 mm] wide continuous white media.
1
Unpacking and Setting up Printer
Setting up the Printer
2-3