Media Errors - Brady BBP 85 User Manual

Media Errors

Problem/Message
Printer will not feed labels.
Printer Error. Media Jam. Print
job canceled.
Media shifts when printing
frames around label causing a
slight misalignment of the
frame.
®
BBP 85 Label Printer User's Manual
Cause
The leading edge of the label roll is
not inserted correctly.
- or -
The leading edge of the label roll is
uneven or torn (not a straight edge).
Media is in the media guides, but
not present in leading edge sensor.
- or -
Media is in the leading edge sensor,
but not present in the media guides.
- or -
Media is jammed in printer.
Media guides not adjusted correctly,
producing slack that allows the tape
to shift during printing.
Problem Resolution
Corrective Action
Install the media correctly
- or -
Cut a straight leading edge on the
label roll.
Reinstall the media then restart print
job.
Adjust media guides so they are
snug against the media. To make
fine adjustments to the frame, see
"Adjusting Print Offset" on page 5-8
Media Errors
9-3