Adjusting The Headlamps; Vertical Aim Adjustment - Ford EXPLORER 2014 Owner's Manual

Hide thumbs Also See for EXPLORER 2014:

Table of Contents

3. Carefully separate the cover from the housing.

4. Remove the air filter element from the housing.

5. Wipe the cover and the housing clean to remove any dirt or debris and

to make sure the cover seals to the housing.

6. Install a new air filter element. Be careful not to crimp the filter

element edges between the housing and the cover. This could cause filter

damage and allow unfiltered air to enter the engine if not properly

ADJUSTING THE HEADLAMPS

The headlamps on your vehicle are properly aimed at the assembly plant.

If your vehicle has been in an accident, an authorized dealer should

check the alignment of your headlamps.

The headlamps on your vehicle can only be vertically adjusted. Your

vehicle does not require horizontal aim adjustments.

To adjust the headlamps:

1. Park your vehicle on a level surface about 25 feet (7.6 meters) away

from a vertical plain surface (3). Check your headlamp alignment at

night or in a dark area so that you can see the headlamp beam pattern.

2014 Explorer (exp)

Owners Guide gf, 3rd Printing, September 2013

7. Lower the driver's side of the cover and slide the

three tabs on the cover into the three slots in the

8. Lower the passenger's side of the cover. Engage

the two clamps to secure the cover to the housing.