Engine Shield; Engine Oil Dipstick; Engine Oil Check - Ford EXPLORER 2014 Owner's Manual

Hide thumbs Also See for EXPLORER 2014:

Table of Contents

Engine shield

Some vehicles may be equipped with an aero-shield under the engine.

This shield needs to be removed for service, including oil and filter

changes. It is secured with four quick release fasteners.

Note: Check the level before starting the engine.

Note: Make sure that the level is between the MIN and MAX marks.

1. Make sure that your vehicle is on level ground.

2. Turn the engine off and wait 10 minutes for the oil to drain into the

3. Remove the dipstick and wipe it with a clean, lint-free cloth. Replace

the dipstick and remove it again to check the oil level.

If the level is at the MIN mark, add oil immediately.

2014 Explorer (exp)

Owners Guide gf, 3rd Printing, September 2013