Using Hill Start Assist - Ford EXPLORER 2014 Owner's Manual

Hide thumbs Also See for EXPLORER 2014:

Table of Contents

Using Hill Start Assist

1. Press the brake pedal to bring the vehicle to a complete standstill.

Keep the brake pedal pressed.

2. If the sensors detect that the vehicle is on a slope, the hill start assist

feature will be activated automatically.

3. When you remove your foot from the brake pedal, the vehicle will

remain on the slope without rolling away for approximately two or three

seconds. This hold time will automatically be extended if you are in the

process of driving off.

4. Drive off in the normal manner. The brakes will be released

automatically.

2014 Explorer (exp)

Owners Guide gf, 3rd Printing, September 2013

Transmission