Switching Off The Tone Squelch; To Differentiate The Enc/Edc Tones; Tone Squelch Operation; Dcs - Alinco DJ-V57 Instruction Manual

6.1.2 Switching Off the Tone Squelch

Press the
key other than the MONI key to complete the setting.

6.1.3 To Differentiate the ENC/EDC Tones

It is possible to set the encode and decode tones independently in the Tone Squelch
Setting mode.
• To set the encode tone, when
set automatically to the same tone.
• To differentiate the decode tone, select another tone in

6.1.4 Tone Squelch Operation

The squelch unmutes only when the signal with the same decoding-setting tone is
received.
6.2

DCS

6.2.1 Setting the DCS

1. Press the FUNC key, and while
" " is displayed on the LCD, and the DCS code is displayed. The initial
setting is 023.
Each time you press the
2. Press any key other than the MONI key to complete the setting. Observe that
" " is displayed.
key in Tone Squelch Setting mode to select TCS-OF, then press any
displayed, select a desired tone. The decode tone is
key, the display switches between:
DCS
023
is displayed on the LCD, press the
DCS-OF
6.Selective Calling
status.
key.
6
37