TRENDnet User's Guide
Wall Mount Installation
Please do not mount the camera until after you complete the installation steps from the
CD-ROM. Temporarily place the camera next to your computer.
To attach the metal plates, carry out the following:
•
Remove the two rubber pads under the base of the Camera.
•
Slide the metal plate onto the base of the camera, making sure that the two
holes on the base of the camera align with the two screw holes on the base of
the camera.
•
Secure the metal plate to the base of the Camera with the two screws
provided.
•
The camera can now be mounted to the ceiling or a wall. See the diagram
below for more information.
© Copyright 2014 TRENDnet. All Rights Reserved.
Installation, Using the AutoRun Wizard
Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will
run automatically.
Note: If the Install Wizard does not run, you may have autorun disabled on your
machine. In this case, browse to the CD drive and run InstallWizard.exe to begin the
installation wizard.
Begin by selecting a language from the drop-down list. There is a choice of five
languages – English, French, German, Spanish, and Russian.
Next, click Install Camera and follow the on-screen steps to continue the installation.
TV-IP862IC
4