TRENDnet TV-IP862IC User Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Security Camera
  5. TV-IP862IC
  6. User manual

TRENDnet TV-IP862IC User Manual

Hd wireless day/night ptz cloud camera
Hide thumbs Also See for TV-IP862IC:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Cover Page
TRENDnet User's Guide

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TV-IP862IC

Summary of Contents for TRENDnet TV-IP862IC

  • Page 1 Cover Page TRENDnet User’s Guide...

  • Page 2: Table Of Contents

    Option B, Connect Camera to your wireless network using WPS (Wi-Fi Protected Setup) button ....9 Audio/Video Setting ............................43 Option C, Connect Camera to your Wireless Network Manually ..............12 Image Setup ......................45 Starting the TRENDnet Cloud Service ........... 16 Action ................................46 Recording ........................ 46 Cloud Mode 1: ............................... 18 Cloud Mode 2: ...............................

  • Page 3: Product Overview

    Pan & Tilt The TV-IP862IC can pan side to side at a remarkable 330 degrees and tilt 115 degrees. Recording Quality The TV-IP862IC can record 1280x720 (720p HD) video resolution.

  • Page 4: Product Hardware Features

    Ethernet Port Power Port Line Out • IR LED – Built-in 6 IR LED, 850nm, for night vision uses. (for TV-IP862IC) • Ethernet Port – Connect Ethernet cables to your wired network devices. • Light Sensor – Detects the light source to turn IR on or off.

  • Page 5: Wall Mount Installation

    Secure the metal plate to the base of the Camera with the two screws provided. • The camera can now be mounted to the ceiling or a wall. See the diagram below for more information. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 6 TV-IP862IC TRENDnet User’s Guide 1. This is TRENDnet’s Terms of Use. Click Agree to continue. 3. The most important part of the setup process is the network connection type. There are three options: Connect camera to your network using a network cable 2.

  • Page 7: Option A, Connect Camera To Your Network Using A Network Cable

    Main Menu. process using the network cable connection first. Click this radio button and click Next to continue, Back to go to the previous screen or Home to return to the Main Menu. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 8 If you have entered the incorrect admin details, you are prompted to change the wizard, click Retry to scan for the camera again. Click Next to continue, Back to configuration, as shown below. go to the previous screen or Home to return to the Main Menu. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 9 Under these circumstances, click Retry later again. If there is no warning, click Next. Please refer to Starting the TRENDnet Cloud Services section for additional Cloud service information. 7. The wizard configures your parameters.

  • Page 10: Option B, Connect Camera To Your Wireless Network Using Wps (Wi-Fi Protected Setup) Button

    TRENDnet User’s Guide Option B, Connect Camera to your wireless network using 9. Scan the barcode to download the TRENDnet CloudView App for Apple iOS or Android™ . The app can also be found by searching TRENDnet from the Apple WPS (Wi-Fi Protected Setup) button App Store or Google Play™...
  • Page 11 Back or Home to return to the main menu. go to the previous screen or Home to return to the Main Menu. 2. The wizard will now search for your camera. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 12 Cloud service information. to return to the Main Menu. 7. Scan the barcode to download the TRENDnet CloudView App for Apple iOS or Android™ . The app can also be found by searching TRENDnet from the Apple 5. The wizard will now configure your parameters.

  • Page 13: Option C, Connect Camera To Your Wireless Network Manually

    1. Follow the instructions in the next screen to Power up the Camera. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu. 3. The wizard will now search the network for your camera. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 14 The password should be between 8 and 16 characters. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 15 Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu. The wizard will search for wireless Access Points. Click the Rescan button if you do not find your AP. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 16 TRENDnet User’s Guide 9. The camera will connect to the wireless network. 11. Scan the barcode to download the TRENDnet CloudView App for Apple iOS or Android™ . The app can also be found by searching TRENDnet from the Apple App Store or Google Play™.

  • Page 17: Starting The Trendnet Cloud Service

    3. You will be prompted to install the plug-in needed for TRENDnet access. Click Install. When you first purchase the TV-IP862IC, it’s already configured to run on the internet out of the box. To do this, you will need the following: •...
  • Page 18 Enter a new password and re-type it to confirm it. Click OK to complete. The camera will now display the Cloud view via the TRENDnet cloud service. The next screen will verify that your settings have been successfully changed. Click Login.

  • Page 19: Cloud Mode 1

    Mode 2 indicates the camera is connecting to media in a peer-to-peer fashion to the mode offers configuration and management options, together with an Advance Internet or local network. This mode offers configuration and management options but Configuration mode. not an Advanced Configuration mode. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 20: Cloud Mode 3

    The “red” notification at the bottom of the viewing area warns users of the limited time. Refresh this screen continuously if you wish to view your camera’s live stream. What’s on the interface? © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 21 Click OK to put the changes into effect. 11. Start recording. Toggle between Start/Stop live view recording into your TV-IP862IC folder, under the “My Document” folder, on your PC. 12. Configure settings in the cloud service. 13. Profiles (Select the camera profile).
  • Page 22 5. Mirror: Click the checkbox to mirror the image. 6. Flip: Click the checkbox to flip the image. 7. Black and White: Click the checkbox to change the image to black and white. Click OK to complete these settings. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 23 OK. 4. Confirm the Password: Enter the new password again. Click OK to complete the settings. Locate the folder/directory where you want to store your data, select it and click OK. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 24 : This is a Fit-to-Screen icon. During this process you are redirected to your external IP address which is the camera’s webpage. This is a Fit-to-Normal icon Click this area to resize the screen back to normal view. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 25: Mobile Apps

    “Android” and scan the image. The Bar Code app will read the QR Code and record it. The app will copy the QR link and provide a HTML link to the TRENDnet app. Click on the link.
  • Page 26 Download the app, install it and use the app on your mobile device to view the TRENDnet camera. You will be immediately directed to the iTunes App Store. Click the link to download. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 27: Find The Ip Address Of Your Camera(S)

    After entering your password, click OK. These initial steps are shown using Internet Explorer. When you log in for the first time or camera reset, the TRENDnet Cloud Terms of Use will appear. Click the Accept check box and click Next.
  • Page 28 Username admin and the newly created password. This page only appears then re-enter the New Password to confirm it. Click OK to continue. Click Cancel if you the first time log in. wish to discontinue. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 29 TV-IP862IC TRENDnet User’s Guide The home page for the TV-IP862IC will appear. Now enter the new username and The plug-in will be saved to your Downloads Folder. Click it to begin the installation. password you just created and click Log In.
  • Page 30 Refresh your browser. The live camera image will be displayed. Make sure all browsers are closed. This is the Microsoft Internet Explorer plug-in installation. Login to the camera again after refresh the browser. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 31 Install button. Once the add-on is installed, Internet Explorer will now display the streaming image. The image below is displayed in both Internet Explorer and Chrome. Click the ActiveX pop-up to install it. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 32: Main Web User Interface

    The viewable screen is expanded to full 2. Setup – Configure the camera settings. screen mode. 3. Registration – Register your device with TRENDnet. Snapshot Click this button to take a snapshot of 4. Record button – Click this button to enable recording.

  • Page 33: Setup

    From the menu on the left side of the screen, select an option. Step 1: LAN Settings Under LAN Settings you are provided with two choices, IPv4 Settings and IPv6 Settings. Select DHCP for the router to choose your IP address. Click Next. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 34: Step 2: Internet Settings

    Under Host Name enter the name the DDNS service provided. Enter a Username and Password, repeat the password and finally enter the Timeout. Timeout states the time DDNS is updated. Click Next to continue. Click the Next button to continue. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 35: Step 4: Camera Name Settings

    Click Next to continue. Step 4: Camera Name Settings Enter a name for the camera. This feature is helpful when you have more than one camera setup. When complete, click Next. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 36: Admin

    2. HTTP Authentication – click the checkbox if you wish to enable HTTP authentication. 3. Snapshot URL Authentication – click the checkbox if you wish to enable snapshot authentication of the current video stream using the hyperlink next to it. 4. Click Save to continue. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 37 Blinking. These options allow you to adjust the LED settings according to your requirements. 5. Calibrate the Device – Click the Calibrate the Device button to do exactly what it says. The camera will now pan and tilt to get the system into calibration mode. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 38: Time And Date

    Daylight time according to your requirements. Select an Offset time and from the drop-down list (Month, Week, Day, Hour, and Minute) select a Start Time and an End Time. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 39: Network

    Set the RTSP Port or leave the default at 554. Under UPnP, check the UPnP checkbox if you wish to use UPnP and the same goes for UPnP Port Forward. If you use Bonjour for Mac’s, click the Bonjour checkbox under Apple. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 40 3. Set the Port Settings, HTTP Port and RTSP Port. 4. Set the UPnP settings, UPnP and UPnP Port Forward. 5. Lastly, set the Apple, Bonjour settings. 6. Click Apply to complete the configuration. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 41: Wireless Setup

    Ad-Hoc - An 802.11 networking framework in which devices or stations communicate directly with each other, without the use of an access point (AP). Under Security Mode, select among None, WEP, WPA-PSK, or WPA2-PSK. None – means no security © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 42: Dynamic Dns

    Enter a Password and confirm the Password. Enter a Timeout, in hours, for the length you want the connection to stay active. Click Apply. The Status should change if you have configured the online DNS settings correctly. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 43: Cloud Setting

    This section covers connecting to the cloud. What is a cloud? Cloud computing is being able to connect to your TV-IP862IC from any location. You can access and control the device via the internet. To do this, click the radio button next to the Enable button. Click Apply.

  • Page 44: Cloud Status

    When users choose the CBR encode method, the camera selects the bitrate as the first priority. The TV-IP862IC will adjust the image quality to fit the bitrate. When the user chooses the Quality encode method, the camera select the bitrate to fit the quality bps: 4Mbps/3Mbps/2Mbps/1.5Mbps/1Mbps/768Kbps/512Kbps/384Kbps/256Kbps/128Kbps...
  • Page 45 Encode Type – JPEG Resolution –1280x720/640X352/320X176/160X80 The TV-IP862IC allows users to record data in day and night mode. The TV-IP862IC has FPS – 30/15/10/6/5/3/2/1 LED’s for night mode. This section provides day and night options. You can select it to Encode Method –Quality...

  • Page 46: Image Setup

    Audio Setup The TV-IP862IC allows users to record and broadcast audio. Click the Speaker checkbox to change the volume settings on the camera’s speaker. Click the Microphone checkbox and select your preference from the volume drop-down list. Click Apply to continue.

  • Page 47: Action

    Recording Type should be Video and that the source usually comes from Profiles 1, 2 or 4 under Source. Make sure the Micro SD Card settings are setup to accommodate the huge storage space required for Always connections. Click Apply to complete the configuration. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 48 Profile 3. Video captures source data from Profiles 1, 2, and 4 which is configurable in Video/Audio settings. Recording data can be recorded in increments of 1-6 minutes. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 49 Recycle checkbox if you want to recycle data in the Share Folder. This is useful when you don’t need to keep all the recorded material. Remember to click the Apply button whenever you want to save your changes. Anonymous View © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 50 * For recording and Real Options 1/2/4 1/2/4 video clip, the supported Time supported supported available video profile options are 1/2/4. * For snapshot, the default video profile option is profile 3. Target E-Mail © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 51: Video Clip

    Motion and Sound. finished uploading from the FTP server. This is only available when trigger by Motion and Sound is applied. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 52: Snapshot

    Username – the username your FTP administrator provided Password – the password your FTP administrator assigned you Path – the directory Filename Prefix – the filename you are using to access the data or save the data to © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 53 Recipient E-mail Address – the email address you want to send information to SMTP Mail Server – the mail server domain details Port - the default Port number (465) Username – the username settings provided by your email administrator. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 54: Preset Position

    4. Use the Set As Home button to choose it as your home screen. The TV-IP862IC has a tiny Micro SD card slots at the back of the camera. Micro SD cards 5. Click the Default Home button if you wish to use this configuration as your default are smaller than normal SD cards and require an adapter to work properly in a Micro SD home viewing area.

  • Page 55: Motion Detection

    1. Under Drawing Mode, click Erase motion area to erase the red rectangle from the screen and motion field. Or, click the Clear button to remove the video motion field. 2. Click Apply to accept your configuration changes. © Copyright 2014 TRENDnet. All Rights Reserved.

  • Page 56: Sound Detection

    Sound Detection Tools Sound detection allows the camera to pick up audio from the TV-IP862IC. When you In this section there are two configuration parts – System, and Firmware Upgrade. enable sound detection, the camera listens for sounds based on the sensitivity level you created.

  • Page 57: Tools

    Click the Reset button to restore the TV-IP862IC to its original state. Tools Reboot Camera Click the Reboot button to reboot the TV-IP862IC. If the camera should freeze for some System reason or if you need to reload software, or restart it when using the Micro SD card click Restore Configuration the Reboot button.

  • Page 58: Firmware Upgrade

    The Device Information highlights everything about the TV-IP862IC camera. All information refer to the primary software functions on the TV-IP862IC. The list includes the following: Camera Name – the name of the camera – TV-IP862IC.
  • Page 59 Click the Registration tab to redirect you to the TRENDnet website. Advanced – Log When you click the Registration button, you are redirected to the TRENDnet registration These settings display the Current Log of the device. Click the Clear button to reset the website.

  • Page 60: Trendnetview Pro Software

    To install TRENDnetView Pro on a system running Windows, launch the TRENDnetView Pro installation software on the installation CD-ROM and follow the setup instructions. Once the software is installed, the TRENDnet View Pro camera monitoring utility is ready for use. Add up to 32 network cameras to monitor using the software.

  • Page 61: Troubleshooting

    The default router setting might be a possible reason. Check that the configuration of the router settings allow the Network Camera to be accessed outside your local LAN. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 62 Network Camera. Try also viewing the video using Java. Ensure that you have the latest version of Java installed before you do. Go to www.java.com for more information. © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 63 This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 64 Note: This country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products marketed in the US must be fixed to US operation channels only. 以下警語適用台灣地區 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得 擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時， 應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作 業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射 性電機設備之干擾 © Copyright 2014 TRENDnet. All Rights Reserved.
  • Page 65 TV-IP862IC TRENDnet User’s Guide noteikumiem. Česky TRENDnet tímto prohlašuje, že tento TV-IP862IC je ve shodě se [Czech] základními požadavky a dalšími příslušnými ustanoveními Lietuvių Šiuo TRENDnet deklaruoja, kad šis TV-IP862IC atitinka esminius směrnice 1999/5/ES. [Lithuanian] reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
  • Page 66 Download section limited to, duty, tax, and other fees. and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS the developers.

Table of Contents