Video Clip - TRENDnet TV-IP862IC User Manual

TRENDnet User's Guide

Video Clip

Click the Video Clip checkbox to activate video recording events. There are three main
sections:
Trigger By: Always, Motion, Schedule, and Sound
Video Clip Type: Configure the recording options
Target: The targets available are FTP and E-mail. If you want to record data to an FTP
server, click FTP. If you want to record data to an E-mail account click E-mail.
The Trigger by and Video Clip settings are similar to the options under Recording Type.
Please see the above description for details.
Video Clip - Target
Target offers two variables, FTP or Email. You cannot select both. If you select FTP enter
the details as laid out in the FTP field.
FTP Server – this is your FTP server address
Port – this is the default FTP Port (21) address
Username – the username your FTP administrator provided
Password – the password your FTP administrator assigned you
Path – the directory
Filename Prefix – the filename you are using to access the data or save the data to
Interval – The interval range is set between 60 and 86400. The default interval is 300
seconds. The interval determines the time between two video clips, and is only used
when you trigger, Always and Schedule.
Send next FTP after – The range is 0 to 86400. The default setting is 10 seconds. This
determines the interval to send the next video clip once the previous video clip has
finished uploading from the FTP server. This is only available when trigger by Motion
and Sound is applied.
© Copyright 2014 TRENDnet. All Rights Reserved.
Passive Mode – It's used as Server/client initiation access to bypass any proxies.
Click the Test button if you wish to verify your FTP server information. Click Apply to
confirm the configuration settings.
For Email
Recipient E-mail Address – the email address you want to send information to
SMTP Mail Server – the mail server domain details
Port - the default Port number (465)
Username – the username settings provided by your email administrator
Password - the password settings provided by your email administrator
Sender Email Address – the email address of the sender
Interval – The interval range is 60 to 86400. The default interval is 600 seconds. This
determines the time between two video clips, and is only used when you trigger by
Always and Schedule.
Send next email after – This determines the interval to send the next video clip after the
previous video clip is completed via E-mail. This is only available when you trigger by
Motion and Sound.
TV-IP862IC
50