TRENDnet TV-IP862IC User Manual page 37

TRENDnet User's Guide
Device Settings
1. Camera Name – In this field enter a name for the camera.
2. OSD – Click the OSD checkbox if you wish to have an On-screen display.
3. Label – If you have clicked the OSD previously, enter a name under the Label field
to make the name visible. Also, click the Time Stamp checkbox if you wish to add a
timestamp to the image. Click Save to continue.
4. LED Light – From the drop-down list, you have the option to select Power/Link, Off,
or Blinking. These options allow you to adjust the LED settings according to your
requirements.
5. Calibrate the Device – Click the Calibrate the Device button to do exactly what it
says. The camera will now pan and tilt to get the system into calibration mode.
© Copyright 2014 TRENDnet. All Rights Reserved.
TV-IP862IC
36