TRENDnet User's Guide
Step 6: Setup Complete
This is the final screen of the wizard. It shows the configuration options you selected.
Click Apply to make the changes. After you click through, a notice will appear to mention
that the camera will restart in 60 seconds and that it's saving the settings. After the
camera restarts, you will be directed back to the start of the wizard.
© Copyright 2014 TRENDnet. All Rights Reserved.
System
Admin
Password Settings
In this section there are two configuration parts – Admin and Time and Date. These
settings can be configured using the Setup Wizard but if you have already done the
wizard and want to return to these settings, this is the place to do it.
1. Enter the Old Password (30 characters is the maximum length)
2. Enter the New Password (30 characters is the maximum length)
3. Confirm New Password – Repeat the password you have just entered.
4. Click Save.
Please Note the password can only contain:
Characters: !, @, #, $, %
Add User Account
1. User Name – enter a new username in this field.
2. New Password – enter a password for the user in this field.
3. Confirm New Password – Repeat the password you have just entered.
4. Click Add to continue.
User List
The User List is now populated with the name(s) of the user(s) you have added to the
above configuration. If you wish to delete a user, select the user from the drop-down list
and click Delete.
Authentication
1. RTSP Authentication – click the checkbox if you wish to enable the authentication of
Real-time Transport Streaming Protocol
2. HTTP Authentication – click the checkbox if you wish to enable HTTP authentication.
3. Snapshot URL Authentication – click the checkbox if you wish to enable snapshot
authentication of the current video stream using the hyperlink next to it.
4. Click Save to continue.
TV-IP862IC
Alphanumeric: A-Z, a-z, 0-9, and Special
35