Preset Position; Patrol Position; Sd Management - TRENDnet TV-IP862IC User Manual

TRENDnet User's Guide

Preset Position

This screen shows the software Pan/Tilt functions. You can set preset positions for fast
authentication. Most of the screen is taken up by the camera image. On the right of the
main screen is the Pan/Tilt dial.
Preset Position
1. Preset Name – Enter a name in the field provided to give the position a name.
2. Click Add.
3. To set a new Preset Position – Use the Pan & Tilt dial to select your Pan & Tilt speeds
and select the position.
4. Use the Set As Home button to choose it as your home screen.
5. Click the Default Home button if you wish to use this configuration as your default
home viewing area.
6. Preset Locations –Is a list of presets you can setup under Preset Position. This list is
populated with different camera views and angles.
Preset Locations
The Preset Locations is a list of presets you have setup under Preset Position. This list is
populated with different camera views and angles.
© Copyright 2014 TRENDnet. All Rights Reserved.

Patrol Position

This area is where you setup the movement of the Pan/Tilt during a particular time
frame. This Patrol Position can be setup with different Pan/Patrol Speeds and Dwelling
time(s) in seconds. The Dwelling Time is the duration the camera takes to span a
particular area.
1. Setup the Preset Position – Once you have setup the Preset in the previous
configuration list, select it from the Preset Locations.
2. Click the Select button to transfer this preset to the Patrol Position.
3. Set the position of your Preset. This depends on the priority of Patrol Position –
which item you want to make your priority.
4. For each Patrol Position you can adjust the Dwelling Time (in seconds). This indicates
the time needed to span each Preset while Patrolling.
5. Click Save to continue and finish the process.

SD Management

SD Card
The TV-IP862IC has a tiny Micro SD card slots at the back of the camera. Micro SD cards
are smaller than normal SD cards and require an adapter to work properly in a Micro SD
slot. Here you can format the SD card, select how many files you want to display on a
page, delete a page and also delete a file. When inserting a Micro SD card for the first
time, make sure you don't have any important data stored on the card because once
you format the drive that data is lost.
1. Format the SD Card
2. Select how many files you want to display per page.
3. Setup recording by going to Action, Recording.
4. Designate space for the recording and click Apply.
5. To delete a file. Select the file from the list, click the Delete checkbox and click
Apply.
TV-IP862IC
53