Creating An Ethernet Connection To A Network - Intermec 70 User Manual

To start the connection, simply start using one of the following programs. Your Model
70 automatically begins connecting. Once connected, you can
•
send and receive e-mail messages by using Inbox. Before you can use Inbox, you
need to provide the information it needs to communicate with the e-mail server. For
specific instructions, see "Connecting Directly to an E-Mail Server" later in this
chapter.
•
visit Internet or intranet Web and WAP pages by using Pocket Internet Explorer.
For more information, see Chapter 4, "Microsoft Pocket Internet Explorer."
•
synchronize. For more information, see the ActiveSync online help on your desktop
computer.

Creating an Ethernet Connection to a Network

1. You do not need to create a new connection on your Model 70. Instead, you must
purchase and configure an Ethernet card that is compatible with your Model 70.
2. Obtain the following information from your network administrator: user name,
password, and domain name.
3. Insert the Ethernet card into your Model 70. For instructions on inserting and using
the Ethernet card, see the owner's manual for the card.
4. The first time you insert the card, Network Settings appears automatically so that
you can configure the Ethernet card. Most networks use DHCP, so you should not
have to change these settings unless your network administrator instructs you to do
so. Tap ok. (If it does not appear or to change settings later, tap
Settings. In the Connections tab, tap Network and then the adapter you want to
change, and then tap Properties.)
5. Connect the Ethernet card to the network by using a network cable. For information,
see your owner's manual.
6. Tap , Settings, Connections tab, and then Connections. From the My network
card connects to list, select Work.
7. If you want to synchronize your device, tap
menu, tap Options. In the PC tab, select Include PC when synchronizing remotely
and connect to and select your computer's name. Remote synchronization with a
desktop computer will work only if you have set up a partnership with that
computer through ActiveSync and have set ActiveSync to allow remote
connections. Other restrictions apply. Form more information on synchronizing
remotely, see the ActiveSync online help on your desktop computer.
To start the connection, simply start using one of the programs on your Model 70.
Getting Connected
and then
, and then ActiveSync. In the Tools
6
6-7