Replacing The Backup Battery - Intermec 70 User Manual

Placing the Model 70 in its Cradle
Note: Make sure you connect the Model 70 to an external power source regularly to
recharge the battery to its full capacity.

Replacing the Backup Battery

Your Model 70 contains a coin-cell, lithium, backup battery: CR2032.
To replace the backup battery
1. Locate the backup battery compartment. For help, see "Back Panel View" earlier in
2. Carefully use the stylus to press under the semi-circular extension resting in the
3. Remove the old backup battery.
4. Insert the new backup battery.
5. Close the backup battery compartment.
this chapter.
indented shelf to the left of the actual cover, and then lift up the backup battery
cover with the stylus.
Learning About the Model 70
M70PPG002.eps
1
1-
11