Identification Data; Positioning The Vehicle On The Front Support Stand - APRILIA RS 50 TUONO Use And Maintenance Book

IDENTIFICATION DATA

It is a good rule to write down the frame
and engine numbers in the space provided
in this manual.
The frame number can be used for the
purchase of spare parts.
NOTE
Do not alter the identification
numbers if you do not want to incur severe
penal and administrative sanctions. In
particular, the alteration of the frame
number results in the immediate invalidity
of the guarantee.
FRAME NUMBER
The frame number is stamped on the right
side of the steering column.
Frame no.
use and maintenance RS 50 Tuono
42
ENGINE NUMBER
(in the countries where required)
The engine number is stamped on the
upper part of the crankcase, on the left
side, near the chain pinion.
To reach it, proceed as follows:
Remove the left fairing, see p. 52
◆
(REMOVING THE SUMP GUARD).
Unscrew and remove the two screws (1).
◆
Remove the pinion cover (2).
◆
Engine no.
5
POSITIONING THE VEHICLE ON
THE FRONT SUPPORT STAND
Position the vehicle on the appropriate
◆
r e a r s u p p o r t s t a n d
(POSITIONING THE VEHICLE ON THE
REAR SUPPORT STAND
Insert the two ends of the stand (3) in the
◆
two holes (4) positioned on the lower
ends of the front fork.
Rest one foot on the front part of the
◆
stand (5).
Push the stand (5) downwards until it
◆
reaches the end of its stroke (see figure).
4
3
, p . 4 3
).