Supero AOC-USASLP-H8iR User Manual page 50

AOC-USASLP-H8iR Add-on Card User's Guide
10. Click Accept to accept the configuration of the new virtual disk.
Note: Click the Reclaim button if you want to undo a virtual disk that you just
defined.
11. Click Next to continue with the next configuration step. The Virtual Disk Sum-
mary window appears.
12. Review the configuration shown in the window. If you want to change some-
thing, click Back and change the configuration parameters.
13. Click Finish to accept the configuration and start the initialization process
(unless you selected No Initialization earlier).
Using Manual Configuration: RAID 50
Follow these steps to create a RAID 50 storage configuration using the Manual
Configuration mode of the Configuration Wizard:
Creating a RAID 50 Storage Configuration
Manual Configuration window, shown in Figure 6-5, select two
1. In the first
available drives in the left panel. Click the Right Arrow button to move the
selected drives to the right panel.
2. Click Accept to accept these drives for a new RAID 5 array.
3. Select two more drives for a second RAID 5 array, and click
4. To add a hotspare, select an available drive in the left panel. Select the array
from the drop-down menu, and click Add Hotspare To, as shown in Figure
6-7.
5. To remove a hotspare from an array, select it in the right panel and click
Remove HotSpare.
6. Click Next.
The next Configuration Wizard window appears, as shown in Figure 6-6.
The Arrays with Free Space menu lists the new arrays that you just defined,
plus any existing arrays with holes (free space) that could be used for a new
configuration.
6-14
Accept.