Table of Contents
Advertisement
Chapter 4: MegaRAID Storage Manager Software Overview and Installation
•
Select Client if you are installing MegaRAID Storage Manager software on
a PC that will be used to view and configure servers over a network.
•
Select Server to install only those components required for remote server
management
•
Select StandAlone if you will use MegaRAID Storage Manager software to
create and manage storage configurations on a standalone workstation.
8.
Click Next to proceed.
9.
Click Install to install the program.
10.
Click Finish when the final Configuration Wizard screen appears.
If you select Client installation for a PC used to monitor servers, and if there are no
available servers with a registered framework on the local subnet (that is, servers
with a complete installation of MegaRAID Storage Manager software), you cannot
Figure 4-2: Setup Type Screen
4-5
Advertisement
Table of Contents
