Table of Contents
Advertisement
3.
Select a maximum number of virtual disks to be created. The Configuration
Wizard may not be able to create as many virtual disks as you want, depend-
ing on the current configuration and the number of virtual disks that have
already been created.
4.
Click Next to continue to the next window.
Figure 6-4: Second Guided Configuration Screen
5.
Change the default volume parameters in this window, if needed. In the top
section of the window you can specify the number of virtual disks to create.
You can also choose to use less than the full capacity of this array for the
virtual disk(s). (You could do this to leave capacity available for other virtual
disks that you create later.)
6.
Click Next to continue to the next window.
7.
Check the configuration that you have just defined. If it is acceptable, click
Finish. If you want to change something, click Back to return to the previous
windows.
6-7
Chapter 6: Configuration
Advertisement
Table of Contents
