Table of Contents
Advertisement
Figure 6-6: Manual Configuration - Defining a Virtual Disk
4.
From the Arrays with Free Space menu, select the array to use for the new
virtual disk.
5.
In the right panel, select RAID 0 as the RAID level.
6.
(Optional) Set Size (in MB) to a lower number if you do not want to use the
entire available capacity for the new virtual disk.
7.
(Optional) Change the other Virtual Disk Properties, if necessary.
8.
Click Accept to accept the configuration of the new virtual disk.
Note: Click the Reclaim button if you want to undo a virtual disk that you just
defined.
9.
Click Next to continue with the next configuration step. The Virtual Disk Sum-
mary window appears.
10.
Review the configuration shown in the Virtual Disk Summary window. If you
want to change something, click Back and change the configuration param-
eters
11.
Click Finish to accept the configuration and start the initialization process (un-
less you selected No Initialization earlier).
6-9
Chapter 6: Configuration
Advertisement
Table of Contents
