Table of Contents
Advertisement
AOC-USASLP-H8iR Add-on Card User's Guide
Figure 6-3: First Guided Conguration Screen
Follow these steps to create a new storage configuration in Guided Configu-
ration mode:
1.
Select a redundancy option at the top of the Guided Configuration window:
•
Redundancy Only: Create a configuration only if redundancy (RAID 1 or
RAID 5) is possible.
•
Redundancy when possible: Create a redundant configuration if possible.
Otherwise, create a non-redundant configuration.
•
No Redundancy: Create a non-redundant configuration.
2.
Choose whether you want to use existing arrays in the new virtual disk. The
options are:
•
Use Existing Arrays Only
•
Don't Use Existing Arrays
•
Use Existing and New Arrays
The first and third options are disabled if there are no available existing arrays.
6-6
Advertisement
Table of Contents
