Table of Contents
Advertisement
AOC-USASLP-H8iR Add-on Card User's Guide
Virtual Disk Properties
This section gives an overview of the virtual disk properties accessed in the Web-
BIOS Main screen.
The Properties panel shows the virtual disk RAID level and other defining informa-
tion. Before changes settings, you should make a backup of the information. You
can change the settings by doing any of the following:
Locate: Sets the designated LEDs on the physical drives of the virtual disk
(requires SAFTE support).
Fast or Slow: Select either to initialize the virtual drives.
CC: runs a consistency check (not available for RAID 0).
Physical Drive Properties
This section gives an overview of the physical drive properties accessed in the
WebBIOS Main screen.
The physical drive properties cannot be changed at this screen. The following
information can be changed:
Select MakeDriveOffline to push the drive offline.
Select Locate to enable to drive LEDs. The drive must be in the enclosure.
Prepare for removal option may be available.
Battery Backup Unit
If the card has a battery backup, do the following to view the battery information.
1. Click Adapter Properties in the WebBIOS main screen.
2. Click Next.
3. Click the word Present in the Battery Backup field.
3-4
Advertisement
Table of Contents
