Auto Ack Setup - Furuno FM-8800D Operator's Manual

4.2

Auto ACK Setup

The Auto Ack Menu enables/disables automatic acknowledgement of ship, coast,
and polling calls.
Comply status
Setting of
SHIFT→5ACK key
AUTO ACK
MANUAL ACK
To set COMPLY Status
1. Press the MENU key.
2. Rotate the CH knob (or press up / down arrow key) to choose AUTO ACK
and press the ENT key. The following menu appears.
3. COMPLY STATUS is selected; press the ENT key. The following setting
window appears.
4. Rotate the CH knob (or press up / down arrow key) to choose ABLE or
UNABLE.
5. Press the ENT key.
Note: Automatic acknowledge is automatically disabled when RX call
Can send ABLE
acknowledge automatically.
Can send ABLE
acknowledge manually
**** AUTO ACK MENU ****
COMPLY STATUS ABLE
UNABLE REASON
POLLING CALL
contains error, as required by law. Further, automatic acknowledge is
disabled in case of OFF HOOK.
ABLE
Can send UNABLE
acknowledge automatically.
Can send UNABLE
acknowledge manually.
NO REASON
ON
ABLE
UNABLE
4. BASIC SETUP
UNABLE
4-3