Indications On The Lcd - Furuno FM-8800D Operator's Manual

1.1.3

Indications on the LCD

Below are all the indications which appear on the standby display on the
transceiver unit.
INTL
Hi
Rx
MANUAL ACK *
LAT:
LON: 135° 33. 3917' E
MMSI 123456789
Reference no.
Displays the channel mode.
1
(INTL / USA / WX / CANADA / INLAND-W / PRIV / (MEMO))
SHIFT is displayed if the shift function is active. Or channel mode (for
2
example CANADA) is displayed at the MEMO mode.
Displays the scan mode: SCAN, DW16 or no display. During the scan
mode, channel indications are changed alternatively. No display means
3
that the unit receives continuously on the same channel.
Lights when the loudspeaker is off. Goes off when the loudspeaker is on.
4
Displays the transmission output.
5
(Hi=25W / Lo=1W)
Displays reception signal strength by 4 steps.
1. No signal. Only antenna mark is displayed.
2. Less than 20 dB SINAD
6
3. 20 - 40 dB SINAD
4. 40 dB SINAD and more
RX is displayed during reception and TX is displayed when
7
the RF signal detected at transmission state.
Displays the current channel.
8
(PRIV channel: max three digits)
Is displayed when the DSC routine call is received.
AUTO ACK: Automatic acknowledge
9
MANUAL ACK: Manual acknowledge
Automatic channel setup for reception of the coast call and ship call may be
set to enable (AUTO CH: ENA) or disable (AUTO CH: DIS).
10
If no MMSI is registered, the message "DSC NOT USABLE" appears at
location 9 and 10.
Displays the longitude and latitude of own ship.
11
Displays position fixing (above position) UTC time.
12
Displays AUTO for automatic data input (L/L, time data) from a navigation
13
device or MANUAL for manual data input or NO DAT if no data input more
than 10 seconds.
14 Displays when un-read message(s) exist.
15 Shows own ships MMSI (Maritime Mobile Service Identifier).
*: "DISTRESS MODE" is displayed at distress calling.
1
4
5
7
6
14 DUP 8
9
34° 15. 8008' N
11
15
Standby display on the transceiver unit
SEP 16/'05 12:57:48
SHIFT
2
16
S CAN
3
AUTO CH:ENA *
10
02:44
UTC
12
AUTO
13
Meaning
: antenna mark and short bar
: antenna mark and two bars
: antenna mark and three bars
1. OPERATIONAL OVERVIEW
Current date & time
1-5