Receiving A Test Message - Furuno FM-8800D Operator's Manual

6.4.2

Receiving a test message

When a test call is received, the alarm sounds. If the manual ACK is set, the
following message appears.
1. Press the CANCEL key to silence the alarm. The following display appears.
2. Press the ENT key.
3. Press the CALL key more than three seconds to send the ACK. The screen
returns standby display.
6. MAINTENANCE & TROUBLESHOOTING
Test request
call received.
FROM : 002444888
SAFETY
KIND : TEST
COMM MODE : NO INFO
ACK REQ
CANCEL ALARM
** Received Message **
JAN03/06 11:18
TEST CALL
FROM : 002444888
SAFETY
KIND : TEST
COMM MODE : NO INFO
ACK REQ
PRESS ENT TO ACK.
** Send Message **
TEST ACK
STATION ID : 002444888
SAFETY
KIND : TEST
COMM MODE : NO INFO
ACK
PRESS CALL TO SEND
ECC : OK
6-5