Furuno FM-8800D Operator's Manual page 84

4. BASIC SETUP
4. Rotate the CH knob to choose the call type and press the ENT key. One of
the following display appears depending on the call type selected above.
MESSAGE FILE 1 ENTRY
CALL TYPE : COAST CALL
COAST ID
ROUTINE
COMM MODE: TELEPHONE
COMM OPTION: NO INFO
CH
ACK REQ
NAME
REGIST ERASE
In case of Coast call
MESSAGE FILE 1 ENTRY
CALL TYPE : GROUP CALL
GROUP ID : 0
ROUTINE
COMM MODE: TELEPHONE
COMM OPTION: NO INFO
CH
NO ACK REQ
NAME
REGIST ERASE
In case of Group call
Note1: The communication priority is ROUTINE only.
Note2: The group ID will be registered automatically after a group call message
file is saved.
Note3: If you register a group call, its group ID becomes your own group ID.
5. Press the ENT key and key in each ID followed by the ENT key.
6. COMM MODE is selected; press the ENT key.
7. Choose TELEPHONE or DATA as appropriate followed by pressing the ENT
key. The COMM OPTION field always shows NO INFO.
8. Choose CH and press the ENT key. The following window appears.
4-8
: 00
: NO INFO
:
: 16
:
TELEPHONE
DATA
SELECT CH
MANUAL
MESSAGE FILE 1 ENTRY
CALL TYPE : SHIP CALL
SHIP ID :
ROUTINE
COMM MODE: TELEPHONE
COMM OPTION: NO INFO
CH : 16
ACK REQ
NAME :
REGIST ERASE
In case of Ship call
MESSAGE FILE 1 ENTRY
CALL TYPE : PSTN CALL
COAST ID : 00
COMM MODE: DUPLEX TP
COMM OPTION: NO INFO
TEL :
ACK REQ
NAME :
REGIST ERASE
In case of PSTN call