How To Operate The Status Monitor; Starting The Status Monitor; Finishing The Status Monitor; Restarting The Status Monitor - Konica Minolta IP-011 User Manual

How to Operate the Status Monitor

Starting the Status Monitor

If, at the time of installing the
Printer Tools, Status Monitor is
set to automatically start,
the Status Monitor automatically
starts when a computer starts.
Immediately after the [Konica IP-011 Status
Monitor] window has been displayed, the
printer status is checked.

Finishing the Status Monitor

Click [View] menu-[Finish] on the
[Konica IP-011 Status Monitor] window.

Restarting the Status Monitor

Click [Start]-[Program]-[KONICA IP-011]-
[KONICAIP-011 Printer Tools] to
start the Status Monitor again after you
have exited from the Status Monitor.
Immediately after the [Konica IP-011 Status
Monitor] window has been displayed, the
printer status is checked.
Chapter 5 Status Monitor and Control Panel
IP-011 Printer Controller 5-5