Konica Minolta IP-011 User Manual page 55

Print using the following driver
Select the driver used for printing from the list shown by clicking the [ ] button beside [Details] tab-
[Print using the following driver] box. When a driver is changed, settings of presently shown
property are saved and the property of the newly selected driver will appear.
S
Set up-Original Paper
Select the original paper from the list shown by clicking the [ ] button beside [Setup] tab-[Paper]-
[Original Paper] box.
The original paper you can select is as follows:
Refer to the operating manual of the copier for paper sizes which can be used on each tray.
[**R] indicates feeding the short edge of the paper. Document sizes not including "R" indicate
feeding the long edge of the paper.
Set up-Paper Size
When [Setup] tab-[Paper]-[Original Paper] is
changed, [Setup] tab-[Paper]-[Paper Size] is
automatically set to the same settings as
[Original Paper].
You can select other paper sizes than that
automatically set from the list shown by clicking
the [ ] button beside [Paper Size].
Paper sizes which you can select are the same
as those in the above-mentioned Paper-Original
Paper.
Refer to the operating manual of the copier for paper sizes which can be used on each tray.
[**R] indicates feeding the short edge of the paper. Document sizes not including [R] indicate
feeding the long edge of the paper.
Paper Sizes to Be Selected
A3
A4
A4R
A5R
B4
B5
B5R
B6R
8k
16k
16kR
F4
Ledger
Legal (8.5x14in)
Letter (8.5x11in)
LetterR (8.5x11in)
Statement (5.5x8.5in)
IP-011 Printer Controller 3-17
Chapter 3 Printer Driver