Test Print - Konica Minolta IP-011 User Manual

Test Print

You can check whether the printer driver functions properly by performing a test print after the printer driver has
been installed.
Click the [Start] button of the task bar. Then, select [Settings] of the Start menu and
click [Printers] in the sub menu.
The [Printers] window will open.
Opening from [My Computer]
You can open the [Printers] window by double-clicking the [Printers] folder after double clicking
the [My Computer] icon of the desktop.
. Right-click [Konica IP-011] and click [Properties].
[Konica IP-011 Properties] will appear.
. Select [General] of [Konica IP-011 Properties] and click the [Print Test Page] button.
A test print will start and a screen to confirm print end will appear.
Click the [Yes] button.
A test print will end.
Chapter 2 Setup
IP-011 Printer Controller 2-11