About The Printer Tools; About The Status Monitor; About The Control Panel - Konica Minolta IP-011 User Manual

Hide thumbs Also See for IP-011:

Table of Contents

Chapter 1 Outline

About the Printer Tools

Install the printer driver into the computer system connected to the Konica 7020 + IP-011 series by using

"Setup.exe" on the CD-ROM. During installation of the printer driver, you may simultaneously select installation

of the Printer Tools, which is the generic name of two programs, "Status Monitor" and "Control Panel." The

Printer Tools enable you to monitor the printer status from computers and to change printer settings. Refer to "5

Status Monitor and Control Panel" (5-1 page) for details of the Printer Tools.

During installation of the Printer Tools, you can set the Status Monitor to automatically start up when the 7020 +

IP-011 system starts up. The Status Monitor is a program that monitors printer status. Refer to "2 Setup" (2-1

page) for installation of the printer driver. Refer to "5 Status Monitor and Control Panel " (5-1 page) for details of

the Status Monitor.

The Control Panel enables you to view and change Printer Settings. To access the Control Panel from the Status

Monitor Screen, click [Setup] then click [Printer Settings] from the menu. Refer to "5 Status Monitor and Control

Panel" (5-1 page) for details of Control Panel.

1-8 IP-011 Printer Controller

Table of Contents