Konica Minolta IP-011 User Manual page 44

Chapter 3 Printer Driver
Classification Setting Items
Konica Layout
7020
special
functions
Print page borders
Staple
Duplex
Alternate (available only when On and Off
the finisher is not attached)
Sorting
Print quality setting
Front cover
Back cover
Front/Back cover
Paper Tray
Front/Back cover
Paper Type
Option Finisher
Drawer Base
Paper- Copies
related
matters
3-6 IP-011 Printer Controller
Set Value Description
1-Up (default): 2-Up, This function is used to print two pages,
4-Up, 8-Up and 9-Up four pages, eight pages or nine pages
of documents on one piece of paper.
On and Off This function is used to specify
whether borders are printed or not
between documents when they
are gathered on one piece of paper.
Off, 1-Left, 1-Right, This function is used to select the
2-Left, 2-Right and 2-Top staple position.
1- Sided, 2-Sided Long Edge This function is used to set the
Binding, 2-Sided Short Edge way of the Duplex printing.
Binding and Booklet
This function is used to set the
Alternate printing to on or off.
Sort and Group This function is used to specify
how to output the multiple pages
Smoothing This function is used to specify about
Off and On (Type 1 to 3) Smoothing and Page Protection.
Page Protection Auto and On
On, Off, This function is used when
Printed and Blank front covers are used.
On, Off, This function is used when
Printed and Blank back covers are used.
Tray 1, Tray 2, Tray 3, This function is used to select
Tray 4 and Bypass an output tray used for front
covers and back covers.
Plain This function is used to specify
the paper type used for printing
front covers or back covers.
None, 2 Trays This function is used to select
3 Trays and 4 Trays the Finisher which is an optional
device of the copier.
None, DB-209(2 Trays) This function is used to select
and DB-409(1 Tray) the DB which is an optional device
of the copier.
1 to 999 This function is used to specify
the number of copies to be printed
95/98 NT4.0