1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. Control Unit
  5. IP-011
  6. User manual

Konica Minolta IP-011 User Manual

Konica minolta printer user guide
Hide thumbs Also See for IP-011:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
USER'S GUIDE
IP-011
Before printing read this guide.

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta IP-011

Summary of Contents for Konica Minolta IP-011

  • Page 1 USER’S GUIDE IP-011 Before printing read this guide.
  • Page 2 Thank you very much for your purchase of the IP-011. This Guide deals with making prints, correct handling of the machine, and precaution for safety. Please read before printing. In order to maintain a satisfactory printing performance, please keep this Guide readily available...

  • Page 3: Software License Agreement

    Thank you very much for purchasing the "Konica Printer Controller IP-011." Konica Corp. ("Konica") allows you to use the software attached to the IP-011 only when you agree to its "Software License Agreement." If you do not agree to terms of this agreement, return the software to the distributor from which you purchased it prior to use.

  • Page 4: Table Of Contents

    Rules in This Manual ... viii Chapter 1 Outline ... 1-1 Contents of This Chapter ... 1-2 Outline of the Printer Controller ... 1-3 IP-011 and Printer Engine ... 1-3 IP-011 Hardware Configuration ... 1-4 I/O Interface ... 1-4 Data Flow ... 1-5 How to Use Memory ...
  • Page 5 Printer Driver Function List ... 3-5 Description of Printer Driver Functions (in the alphabetic order) ... 3-8 Alphabetic Order ... 3-8 Driver Function Combination List ... 3-.23 Chapter 4 Operation Panel Setup ... 4-1 Contents of This Chapter ... 4-2 About the LCD Panel ...

  • Page 6: Introduction

    General Problems of Printing ... Appendix A-3 The “OHT Film” is not selectable..Appendix A-3 The Printer Controller does not respond to the “Print” command..Appendix A-3 A message to demand a paper size which you do not use is displayed..Appendix A-4 You can not print the test print ...
  • Page 7 Introduction The IP-011 Printer Controller works as an interface between the Konica 7020 series Copier and a workstation, and enables direct printing from a workstation environment. The printer engine on the printer side and the optional network board include operating manuals (7020 series operating manual/KN-304 operating manual (CD)) respectively.

  • Page 8: About Supplied Items

    Introduction A part or all of this operating manual shall not be used or copied without permission. Konica shall have no liability for any influences caused by using the 7020 series copier +IP-011 system and this manual. Information written in this operating manual is subject to change without notice.

  • Page 9: About Positioning Of This Manual

    About Positioning of This Manual This manual describes how to operate the Printer Controller Konica IP-011 when the Konica 7020 series copier is used as a printer by connecting it to computers or your network. An optional network board (KN-304) is required so as to use the Konica 7020 series copier as a printer by connecting it to your network.

  • Page 10: System Requirements

    Microsoft Windows NT 4.0 and NT Service Pack 3 32MB RAM or more Parallel Port The following are required to print to the Printer Controller by way of the parallel port. Windows-compliant computers Minimum RAM capacity suitable for computers (Refer to the section of each operation system described above.)

  • Page 11: Rules In This Manual

    For example, at the time of double-clicking the [Setup.exe] icon in the [WIN_95] folder in the [PS_DRVR] folder in the [INTALRS] folder of the User Software CD, it is written as e.g. Double-click the [Setup.exe] icon in the “\INTALRS\PS_DRVR/WIN_95 ” folder of the User Software CD. Introduction IP-011 Printer Controller ix...

  • Page 12: Chapter 1 Outline

    Chapter 1 Outline Contents of This Chapter ... 1-2 Outline of the Printer Controller ... 1-3 IP-011 and Printer Engine ... 1-3 IP-011 Hardware Configuration ... 1-4 I/O Interface ... 1-4 Data Flow ... 1-5 How to Use Memory ... 1-6 General View ...

  • Page 13: Contents Of This Chapter

    Chapter 1 Outline Contents of This Chapter This chapter describes the outline of the Konica IP-011 Printer Controller. For the Copier, Konica 7020 series to which the Konica IP-011 Printer Controller is attached, refer to the operating manual of the Copier.

  • Page 14: Outline Of The Printer Controller

    When the command for printing is executed from applications on Windows 95/98 or Windows NT, print data is sent to the IP-011 by way of a parallel cable (IEEE 1284) or a network. Then, the IP- 011 rasterizes the print data to image data, which is sent to the Konica 7020 series Printer Engine by way of the PCI bus.

  • Page 15: Ip-011 Hardware Configuration

    CPU: Power PC 401 GF Program memory: FLASH ROM System memory: 16MB SD-RAM Memory The IP-011 is equipped with 16 MB memory as standard and can be expanded to 80 MB at the maximum. I/O Interface Parallel Centronics (IEEE1284)/ amphenol 36 pin male connector...

  • Page 16: Data Flow

    Status Monitor Control Panel HTML Printer Driver Spooler Interface IEEE1284 Network IEEE1284 Network (TCP/IP,IPX/SPX) (TCP/IP,IPX/SPX) Printer Controller IEEE1284 Intermediate Language Interpreter Memory IP-011 Command for Printing Engine Status Image Data Printer Engine PCI Bus E-RDH Memory Engine IP-011 Printer Controller 1-5...

  • Page 17: How To Use Memory

    How to Use Memory Most of memory of the IP-011 is used for rasterizing images and a part of it is used for the system operation. In addition, E-RDH memory of the Konica 7020 series is used for print processing.

  • Page 18: General View

    General View The IP-011 is mounted to the Konica 7020 series. The following is the general view. IP-011 Konica 7020 Chapter 1 Outline Parallel Port The IP-011 is attached to the back side of the Konica 7020 series. IP-011 Printer Controller 1-7...

  • Page 19: About The Printer Tools

    If you set the Status Monitor to automatically start up at the time of installing the Printer Tools, when computers connected to the 7020 series + IP-011 system are started up, the Status Monitor which is a program to monitor the printer status automatically starts up.

  • Page 20: About The Printer Driver

    Windows NT 4.0 Windows 2000 (to be supported) Refer to “2 Setup” (2-1 page) for how to install the printer driver. Refer to “3 Printer Driver” (3-1 page) for detailed functions of the printer driver. Chapter 1 Outline IP-011 Printer Controller 1-9...

  • Page 21: Chapter 2 Setup

    Installation to Windows95/98 ... 2-4 Installation to WindowsNT4.0 ... 2-7 Uninstallation of the Printer Driver ... 2-10 Test Print ... 2-11 Print from Applications ... 2-12 Execution of Printing ... 2-12 Print Settings ... 2-12 IP-011 IP-011 Printer Controller 2-1...

  • Page 22: Contents Of This Chapter

    Contents of This Chapter In order to use the 7020 series +IP-011 system, it is required to connect the 7020 series +IP-011 system to computers by way of the parallel port and to install the printer driver to the computers. This chapter describes how to install the printer driver and how to print from applications.

  • Page 23: Installation Of The Printer Driver

    Installation of the Printer Driver Before Installation Models and Environment of Computers The Printer Controller for Konica 7020 series, IP-011, can be used with most computers ranging from personal computers to workstations. The IP-011 includes the printer driver for Windows95/98 and WindowsNT.

  • Page 24: Installation To Windows95/98

    The [Konica IP-011 Software License Agreement] screen will appear. Then, click the [Yes] button. To use the Konica IP-011 Printer Driver, you are required to agree to the license. When you agree to the license, click the [Yes] button to proceed.
  • Page 25 The [Type of Connection] screen will appear. Then, select [Local] and click the [Next] button. When the Konica 7020 series Copier (IP-011) is directly connected to a computer to which the printer driver will be installed, select [Local]. In the case of selecting [Network] When personal computers or workstations are connected to the network and, you want to print by way of the network, connect to the optional network board (KN-304) and select [Network].
  • Page 26 Installation by Using the Plug & Play In this method, only the printer driver is installed. Connect the IP-011 to a computer with the computer turned off. Turn on the computer and start Windows Devices compliant with the Plug & Play are automatically detected, and [Add New Hardware Wizard] will appear.

  • Page 27: Installation To Windowsnt4.0

    Installation to WindowsNT4.0 Only authorized system administrators or printer administrators are allowed to install the Konica IP-011 printer driver to WindowsNT4.0. Please keep the “User Software CD” on hand since it is required to install the printer driver. Printer Management on WindowsNT Since WindowsNT is an operating system made specially for the network operation, it is equipped with heavier security functions than other Windows.
  • Page 28 The [Type of Connection] screen will appear. Then, select [Local] and click the [Next] button. When the Konica 7020 series Copier (IP-011) is directly connected to a computer to which the printer driver is to be installed, select [Local]. In case of selecting [Network] When installing Konica IP-011 printer driver to win4.0 that does not conduct print service, select...
  • Page 29 Choice is made initially to install only the printer driver. To install Printer Tools together, put the check mark of Printer Tools additionally. When you print by way of the network, printer tools can not be operated. Remove the check mark of the printer tools so as not to be installed.

  • Page 30: Uninstallation Of The Printer Driver

    Uninstalling by Using the Uninstaller You can also delete the printer driver by clicking the [Start] button of the task bar to select [Program] of the Start menu and then, selecting [Konica IP-011] to click [Uninstaller]. After clicking [Uninstaller], go to the Step 6.

  • Page 31: Test Print

    Test Print You can check whether the printer driver functions properly by performing a test print after the printer driver has been installed. Click the [Start] button of the task bar. Then, select [Settings] of the Start menu and click [Printers] in the sub menu.

  • Page 32: Print From Applications

    Execution of Printing Click the [File] menu of each application and click [Print]. Check that [Konica IP-011] is shown on [Printer Name] and click [OK]. When [Konica IP-011] is not shown, select it from the list box. Setting the [Print] dialog box Refer to the user's manual of each application.
  • Page 33 When [Bypass tray] is specified, you can feed paper from the bypass tray. In order to specify [Tray 3] or [Tray 4], the DB (optional Paper Tray) must be attached to the copier. Chapter 2 Setup IP-011 Printer Controller 2-13...
  • Page 34 [Output]-[Output Tray]: Printer's default, Tray 1, Tray 2, Tray 3 and Tray 4 Specifies the way to output. When [Printer's default] is selected, the output tray specified on [Paper] of the control panel will be used for output. In order to specify [Tray 2], [Tray 3] and [Tray 4], it is required that a finisher is attached to the Copier and that the [Finisher] option must be selected.
  • Page 35 Specifies the paper type of a front cover or a back cover. [Paper Type]: Plain, OHT Film, OHT Interleave and OHT Interleave Printed Specifies the paper type of other paper than a front cover or a back cover. Chapter 2 Setup IP-011 Printer Controller 2-15...
  • Page 36 [Option] tab [Finisher]: None, 2 Trays, 3 Trays and 4 Trays Specifies the finisher of the copier option. [Option Tray]: None, DB-209(2 Trays) and DB-409(1 Tray) Specifies the Option Tray of the copier option. 2-16 IP-011 Printer Controller...
  • Page 37 Edits the watermark. (Refer to “[Edit/Add Watermark(Sub-Menu)] dialog box” on 2-18 page.) [Add] Adds new watermarks. (Refer to “[Edit/Add Watermark(Sub-Menu)] dialog box” on 2-18 page.) You can add up to 50 watermarks. [Delete] Deletes watermarks. Chapter 2 Setup IP-011 Printer Controller 2-17...
  • Page 38 Specifies the darkness of the edit text. [Angle]: -90 degrees to +90 degrees Specifies the angle of the edit text. [Position]: Automatic centering and Manual positioning Specifies where on a page the edit text is put. 2-18 IP-011 Printer Controller...

  • Page 39: Chapter 3 Printer Driver

    Compliant OS ... 3-3 Property of Printer Driver ... 3-3 Printer Driver Function List ... 3-5 Description of Printer Driver Functions (in the alphabetic order) 3-8 Alphabetic Order ... 3-8 Driver Function Combination List ... 3-23 Chapter 3 Printer Driver...

  • Page 40: Contents Of This Chapter

    This chapter describes functions of the Printer Driver which is installed to computers from which the Konica 7020 series +IP-011 system is used from three different viewpoints, the function list and description of functions and the list of combined functions in the alphabetic order.

  • Page 41: Working Environment

    Property of Printer Driver On the [Printer] window shown by clicking [Start]-[Settings]-[Printers], right-click the [KONICA IP-011] icon. When [Properties] is clicked on the shown menu, [KONICA IP-011 Properties] will appear. You can set all functions of the Printer Driver on [KONICA IP-011 Properties].
  • Page 42 Performs settings related to Front Cover, Back Cover and Paper Type. [Print Quality] tab Performs settings related to Smoothing and Page Protection. [Option] tab Performs settings related to Finisher and DB. [Watermark] tab Performs settings related to Watermark. 3-4 IP-011 Printer Controller...

  • Page 43: Printer Driver Function List

    In addition, refer to “2 Setup” (2-1 page) for how to perform printer settings from applications, “4 Control Panel Setup” (4-1 page) for how to perform printer settings from the LCD panel and “5 Status Monitor and Control Panel” (5-1 page) for how to perform printer settings from the Printer Tools.
  • Page 44 Option Finisher Drawer Base Paper- Copies related matters 3-6 IP-011 Printer Controller Set Value Description 1-Up (default): 2-Up, This function is used to print two pages, 4-Up, 8-Up and 9-Up four pages, eight pages or nine pages of documents on one piece of paper.
  • Page 45 This function is used to delete a watermark. This function is used to show version information of the Printer Driver. This function is used to return the settings to default settings. This function is used to perform a test print. IP-011 Printer Controller 3-7 NT4.0...

  • Page 46: Description Of Printer Driver Functions (In The Alphabetic Order)

    Functions (setting items) which can be set with the Printer Driver are summarized in the alphabetic order. These settings can be set by using [Start]-[Settings]-[Printers]- [KONICA IP-011] property. The tabs in this section are those in the [KONICA IP-011] property.
  • Page 47 In addition, when [Reconnect at Logon] of the [Capture Printer Port] dialog is selected, a virtual printer port is automatically reconnected at log-on. Chapter 3 Printer Driver Back Cover Back Cover [On] [Blank] [On] [Printed] IP-011 Printer Controller 3-9...
  • Page 48 [Watermark] tab return to defaults. Delete port When a port is specified on the [Delete Port] dialog shown by clicking [Details] tab-[Delete Port] button, and the [OK] button is clicked, you can delete the specified port. 3-10 IP-011 Printer Controller...
  • Page 49 [2-Sided Long Edge Binding] Prints paper so that heads of both sides become upward [Booklet] Prints paper so that booklets are made when it is folded into two. Chapter 3 Printer Driver IP-011 Printer Controller 3-11...
  • Page 50 When [B6R] is selected as a paper size, When Alternate is set to[On], When Duplex is set to [Booklet], or When sorting is set to [Group]. When Front Cover is set to [On], you can not use the Alternate printing and Sort. 3-12 IP-011 Printer Controller...
  • Page 51 [ ] button beside the [Layout] box. Default of Layout is [1-Up]. The layout is made as follows: [1- Up] Chapter 3 Printer Driver Front Cover Front Cover [Off] [On] [Blank] [2-Up] [4-Up] IP-011 Printer Controller 3-13 Front Cover [On] [Printed]...
  • Page 52 When [DB-409] is selected in the Option Tray settings, you can not select [Tray 4] as a paper tray. When [DB-209] is selected in the Option Tray settings, you can select all trays as a paper tray. 3-14 IP-011 Printer Controller [9-Up]...
  • Page 53 [Setup] tab-[Paper Tray] box. When [Auto] is selected, a paper tray with paper which a user specified from an application by using [Konica IP-011 Printer Controller Driver Properties] is automatically selected. In order to use ,[B6R], set to [Bypass]. In addition, when the bypass tray is selected, you can select [OHT Film] from paper types of the [Paper] tab.
  • Page 54 Click [General] tab-[Print Test Page] button to perform a test print. Printing to the following port Select the port name of the IP-011 from the list shown by clicking the [ ] button beside [Details] tab-[Printing to the following port] box to change the printing port.
  • Page 55 [**R] indicates to feed paper from a short edge. Document sizes not including [R] indicate to feed paper from a long edge. Chapter 3 Printer Driver Paper Sizes to Be Selected (Europe/others) 16kR Ledger Legal (8.5x14in) Letter (8.5x11in) LetterR (8.5x11in) Statement (5.5x8.5in) IP-011 Printer Controller 3-17...
  • Page 56 [Sorting] when the following conditions are satisfied. When [OHT Interleave] or [OHT Interleave Printed] is not selected in the [Paper] tab, When Front/Back Cover are not set, and When the Staple setting is set to [Off]. 3-18 IP-011 Printer Controller Sort group...
  • Page 57 Although it takes more time that an application is released from the printing process, this method is suitable in the case that free space for spooling in your hard disk is small.
  • Page 58 The [Transmission retry] box is used to set the waiting time until a printer a printer becomes available of printing in the unit of second when a computer fails to output once and outputs print data again. If the waiting time exceeds this set value, a printer error is shown and the job is automatically cancelled.
  • Page 59 In order to change the print size of documents, you can select the size of print in 1% by using [Setup] tab-[Zoom] box. Default of Zoom is 100%. The value can be specified from between 25% and 400%. Chapter 3 Printer Driver IP-011 Printer Controller 3-21...

  • Page 60: Driver Function Combination List

    None DB-209 DB-409 * When the paper size is A3, B4, B6R, Ledger(11x17in), Legal(8.5x14in) or Statement(5.5x8.5in), if the DB-409 is selected, you can not use the Paper Tray 3. 3-22 IP-011 Printer Controller Paper Tray Paper Type Auto Plain Select...
  • Page 61 3 Trays 4 Trays Option Tray None DB-209 DB-409 Sorting Layout Sort Group 1 up 2 up 4 up 8 up 9 up Chapter 3 Printer Driver Staple Print Page Borders None 1-left 1-right 2-left 2-top IP-011 Printer Controller 3-23...
  • Page 62 Front/Back Cover Paper Plain Type Thick Finisher None 2 Trays 3 Trays 4 Trays Option Tray None DB-209 DB-409 3-24 IP-011 Printer Controller Duplex Front Cover Back Cover 2 Sides 2 Sides Short Long Booklet Printed Edge Edge Printed Binding...
  • Page 63 Front/Back Cover Paper Plain Type Thick Finisher None 2 Trays 3 Trays 4 Trays Option Tray None DB-209 DB-409 Finisher Option Tray Thick None 2 Trays 3 Trays 4 Trays None IP-011 Printer Controller 3-25 Chapter 3 Printer Driver DB-209 DB-409...
  • Page 64 Network Setup ... 4-11 Select Language ... 4-11 Print Quality ... 4-12 I/O Timeout ... 4-12 Test Print ... 4-13 CMD Error Pape ... 4-13 Error Pape ... 4-13 Factory Default ... 4-14 Help ... 4-14 IP-011 IP-011 Printer Controller 4-1...

  • Page 65: Contents Of This Chapter

    Refer to “2 Setup” (2-1 page) for how to use the Printer Driver from applications, “3 Printer Driver” (3-1 page) for how to set the printer from the Printer Driver and “5 Status Monitor and Control Panel” (5-1 page) for how to set the printer from the Printer Tools.

  • Page 66: About The Control Panel

    Engine, this LED is steadily lit. SCANNER/PRINTER LED This LED is turned on in green in the printer mode and is turned on in red when a warning message or an error message is issued. In such a case, the print process is interrupted. Opera- tions by an operator or a service is required.

  • Page 67: How To Enter Settings On The Lcd Panel

    Chapter 4 Control Panel Setup How to Enter Settings on the LCD Panel You can enter settings from the printer mode basic screen shown on the LCD by using either the item selection or the information entry. Item Selection In this method, various settings are performed by selecting a button with a number which corre- sponds to the item you would like to select on the LCD.

  • Page 68: Printer Mode Basic Screen

    Printer Mode Basic Screen When the Konica 7020 series +IP-011 system starts properly, the printer mode basic screen is displayed on the LCD by pressing the [SCANNER/PRINTER] button. Printer Menu Screen The following printer menu screen is displayed by pressing the [Setting] key on the printer mode basic screen.

  • Page 69: Printer Setting Screen

    Printer Setting screen When “1. Setting” on the printer menu screen is selected, the Printer Setting screen is displayed. When an item is selected on the Printer Setting screen, each setting screen corresponding to the selected item is displayed. Buttons commonly used among setting screens are as follows: [Main Menu] Pressing the [Main menu] button returns to the printer menu screen.

  • Page 70: Procedures Of The Printer Setting

    Procedures of the Printer Setting The following show the procedures of the printer setting by using the LCD Panel; Press the [SCANNER/PRINTER] button to show the printer mode basic screen. The copy mode basic screen is switched to the printer mode basic screen.
  • Page 71 Press the [No] button not to save the settings. Refer to “ Configuration of the Printer Setting Menu ” (4-9 page) for configuring the printer setting menu. Refer to “ Functions of the Printer Setting ” (4-11 page) for the printer setting details.

  • Page 72: Configuration Of Printer Setting Menu

    2 No 3 Queue Scan Rate 4 Frame Type 5 Disable Bindery 6 NDS Context 7 NDS Tree IP-011 Printer Controller 4-9 1 Enable DHCP 2 Static IP Address 1 IP Address 2 Subnet Mask 3 Gateway 4 Persistent IP...

  • Page 73: Print Quality

    2 NIC Configuration 6 CMD Error Page 1 Off 2 On 7 Error Page 1 Off 2 On 8 Factory Default 9 Help 4-10 IP-011 Printer Controller 1 Off 2 Type 1 3 Type 2 4 Type3 1 Auto 2 On...

  • Page 74: Functions Of The Printer Setting

    Functions of the Printer Setting Network Setup Select [1. Setting]-[1. Network Setup] on the Printer Setting screen to display the network setup screen. [1. Network setup] is displayed only when the KN-304 is attached. Items of the network setup screen are as follows: Refer to the operating manual of the KN-304 for details of the network connection.

  • Page 75: I/O Timeout

    Chapter 4 Control Panel Setup Print Quality Select [1. Setting]-[3. Print Quality] on the Printer Setting screen to display the Print Quality Setup screen. Items of the Print Quality Setup screen are as follow: [1. Smoothing] Press [1] to display the Smoothing Setup screen. You can set to [Off], [Type 1], [Type 2] or [Type 3] on the Smoothing Setup screen.

  • Page 76: Test Print

    CMD Error Page Select [1. Settings]-[6. CMD Error Page] on the printer mode basic screen to display the CMD Error page Setup menu. Items of the CMD Error page Setup menu are as follows and the factory default is [1.OFF].

  • Page 77: Factory Default

    Chapter 4 Control Panel Setup Factory Default Select [1. Setting]-[8. Factory Default] on the printer mode basic screen to return various settings to the factory default. Items of the Factory Default are as follows: [Language]: [Smoothing]: [Page Protection]: Auto [I/O Timeout]: *Refer to the operating manual of the KN-304 for details of Factory Default of the Network Setup.

  • Page 78: Chapter 5 Status Monitor And Control Panel

    Starting the Control Panel ... 5-8 Finishing the Control Panel ... 5-8 Buttons of the Control Panel ... 5-9 Settings of Paper ... 5-10 Printer Setting ... 5-11 Test Print ... 5-12 Confirmation of Configurations ... 5-12 IP-011 Printer Controller 5-1...

  • Page 79: Contents Of This Chapter

    “Status Monitor” and “Control Panel” which are used on computers connected to the Konica 7020 series +IP-011 system. The Printer Tools enable you to monitor the printer status and perform printer settings from computers connected to the Konica 7020 series +IP-011 system.

  • Page 80: Status Monitor And Control Panel

    Status Monitor automatically starts and the Status Monitor icon is displayed on the task bar when a computer is started. The Status Monitor displays information about the printer status which has been received from the IP-011 in the form of easy-to-understand images and messages. Additionally, in the case that any problems occur on the printer side, the method of recovery is displayed on the Status Monitor.

  • Page 81: Working Environment

    IEEE 1284 (Compatible mode, Nibble and ECP) How to Install When executing “setup.exe” held in the CD-ROM to install the printer driver, you can make a choice to install Status Monitor and Control Panel simultaneously with the printer driver. Refer to “2 Setup” (2-1 page) for installation of the Printer Driver.

  • Page 82: How To Operate The Status Monitor

    Printer Tools, the Status Monitor automatically starts when a computer starts. Immediately after the [Konica IP-011 Status Monitor] window has been displayed, the printer status is checked. Finishing the Status Monitor Click [View] menu-[Finish] on the [Konica IP-011 Status Monitor] window.

  • Page 83: Show/Hide The Status Monitor

    Status Monitor is hidden, the Status Monitor is displayed. When an error occurs in communication with the printer, a confirmation message is displayed. Click the [OK] button of the confirmation message and check the connection to the printer. 5-6 IP-011 Printer Controller...

  • Page 84: Display Change

    [Reduce] display. In the [Expand] display, when a problem related to the printer occurs and information related to the problem is shown on the Status Monitor, the position of the problem is indicated by using an image and a method of recovery is displayed in the How to Recover list.

  • Page 85: How To Operate The Control Panel

    Finishing the Control Panel Click the [OK] button to send data of settings to the printer. The [Konica IP-011 Control Panel] dialog is closed and the [Konica IP-011 Status Monitor] window is displayed. Click the [Cancel] button not to perform settings.

  • Page 86: Buttons Of The Control Panel

    [Konica IP-011 Control Panel] dialog is closed and the [Konica IP-011 Status Monitor] window is displayed. [Cancel] When the [Cancel] button is clicked, the [Konica IP-011 Control Panel] dialog is closed and the [Konica IP-011 Status Monitor] window is displayed. [Apply] When the [Apply] button is clicked, data of present settings of the tab is sent to the printer.

  • Page 87: Settings Of Paper

    Settings of Paper Click the [Paper] tab of the [Konica IP-011 Control Panel] dialog. The [Paper] tab of the [Konica IP-011 Control Panel] dialog is displayed. On the list shown by clicking the [ ] button beside [Paper Size], [Paper Tray] and [Output Tray] of the [Paper] group box, select an item you desire respectively.

  • Page 88: Printer Setting

    Printer Setting Click the [Printer Setting] tab of the [Konica IP-011 Control Panel] dialog. The [Printer Setting] tab of the [Konica IP-011 Control Panel] dialog is displayed. Click either [Auto] or [On] of the [Page Protection] group box. Select the desired item on the list shown by clicking the [ ] button of the [I/O Timeout] Group Box.

  • Page 89: Test Print

    Test Print Click the [Test Print] tab of the [Konica IP-011 Control Panel] dialog. The [Test Print] tab of the [Konica IP-011 Control Panel] dialog is displayed. Click the [Print Demo/Configuration Page] button to print the Print Demo/Configuration Page. Click the [Print NIC Status Page] button to print the Print NIC Status Page.
  • Page 90 The print setting of a job does not correspond to the result of printing..Appendix A-5 The “Duplex” option is not displayed..Appendix A-5 Memory Error / Memory Overflow / Overrun ... Appendix A-5 Appendix A Troubleshooting IP-011 Printer Controller Appendix A-1...

  • Page 91: Appendix A Troubleshooting

    Please confirm the printer setting Please remove original according to the message screen of the printer Please dispose the trouble according to the message screen of the printer Please dispose the trouble according to the message screen of the printer Please dispose the trouble according to the User Reference Guide.

  • Page 92: Basic Troubleshooting

    The Printer Controller does not respond to the “Print” command. Check that [KONICA IP-011] is selected as a current printer. It is required to select [KONICA IP-011] as a present printer on Windows before printing. Check that the power switch of the copier is turned on.
  • Page 93 Try to make a copy When copy is available, go to the Step 4. Turn off the copier and restart it. Print the test print again after the Printer Controller is ready. Contact a service provider when you can not print the test print after taking the above- mentioned procedures.
  • Page 94 Print Quality” (4-11 page) for the page protection. Expand memory. Memory of the IP-011 can be expanded up to 80 MB. Contact a service provider for details of the memory expansion. Printer Driver Function List” (3-5 page) or “4 Control Panel Setup...
  • Page 95 Appendix B Product Specifications Appendix B Product Specifications Product Specifications ... Appendix B-2 IP-011 Printer Controller Appendix B-1...

  • Page 96: Appendix B Product Specifications

    Basic Configuration Control Board CPU: Program Memory: System Memory: Interface: Appendix B-2 IP-011 Printer Controllerg built in the Konica 7020 series Copier You can select from the following paper sizes: Paper Sizes to Be Selected (US) Legal (8.5x14in) Letter (8.5x11in) LetterR (8.5x11in)
  • Page 97 5 % to 95 %RH (non-condensing) Restrictive Conditions In the Printer mode, the EKC (Electric Key Counter) of the Konica 7020 series is not available. Although the Weekly Timer function of the Konica 7020 series is available in the Printer mode, the power is not turned Off until the data output is finished when print data remains in the E-RDH .

  • Page 98: Index

    ... index-2 IP-011 Printer Controller index-1...
  • Page 99 How to Use Memory ... 1-6 I/O Interface ... 1-4 I/O Timeout ... 4-10, 4-12 Installation of the Printer Driver ... 2-3 IP-011 Hardware Configuration ... 1-4 Language ... 4-9 LCD ... 4-3 [Main] ... 4-6 Memory Error ... Appendix A-5 Memory Overrun ...
  • Page 100 Status Monitor working environment ... 5-4 [Stop/Clear] button ... 4-3 T-1 ... 3-22 Test Print ... 4-10, 4-13 [Test Print] tab ... 5-3, 5-12 Timeout settings ... 3-20 Uninstaller ... 2-10 [Water Mark] tab ... 2-17, 3-4 IP-011 Printer Controller index-3 index...
  • Page 102 MAUFACTURER KONICA CORPORATION TOKYO JAPAN 2000. 1...

Table of Contents