Brake Light Switches; Adjusting The Clutch Free Play - Yamaha BIG BEAR 400 Owner's Manual

EBU24740

Brake light switches

The operation of the brake light switches must be
checked and, if necessary, adjusted at the inter-
vals specified in the periodic maintenance and lu-
brication chart.
The brake light switch for the brake pedal can be
adjusted as follows, but the other brake light
switches should be adjusted by a Yamaha dealer.
NOTE:
The brake light switch is properly adjusted when
the brake light comes on just before braking takes
effect.
Turn the adjusting nut while holding the brake light
switch in place. To make the brake light come on
earlier, turn the adjusting nut in direction (a). To
make the brake light come on later, turn the adjust-
ing nut in direction (b).
1. Brake light switch
2. Brake light switch adjusting nut
EBU24771

Adjusting the clutch free play

The clutch free play must be adjusted periodically.
Adjust the free play as follows.
1. Loosen the locknut.
2. Slowly turn the adjusting bolt counterclock-
wise until resistance is felt, and then turn it 1/8
clockwise.
8-35
8