Brake Light Switches - Yamaha GRIZZLY 350 2016 Installation Manual

1. Locknut
2. Brake lever free play adjusting bolt
4. Tighten the locknut at the brake lever.
5. Check gap "A" again and, if necessary, adjust
it.
TIP
When adjusting the rear brake lever free play:
 Be sure not to step on the brake pedal.
 Make sure the brake pedal does not move.
EBU29882

Brake light switches

The brake light, which is activated by the brake
pedal and brake levers, should come on just be-
fore braking takes effect.
The rear brake light switch for the brake pedal can
be adjusted as follows, but the other brake light
switches should be adjusted by a Yamaha dealer.
Turn the rear brake light switch adjusting nut while
holding the brake light switch in place. To make
the brake light come on earlier, turn the adjusting
nut in direction (a). To make the brake light come
on later, turn the adjusting nut in direction (b).
1. Rear brake light switch
2. Rear brake light switch adjusting nut
8-34
8