Yamaha BIG BEAR 400 Owner's Manual page 25

EBU28350
Override switch "OVERRIDE"
1. Override switch "OVERRIDE"
Top speed is normally limited when operating in
differential gear lock. If conditions require more en-
gine power when riding forward, push and hold this
switch to override the differential gear lock speed
limiting function. (See page 4-8.) Releasing the
switch restores the speed limiting function.
While the override switch is pushed, the reverse in-
dicator light "REVERSE" will flash.
EWB00110
POTENTIAL HAZARD
Riding too fast while the ATV is in four-
wheel-drive differential gear lock.
WHAT CAN HAPPEN
All wheels turn at the same speed when the
differential is locked, so it takes more effort
to turn the ATV. The effort needed to turn in-
creases with the riding speed. You may lose
control and have an accident if you cannot
make a sharp enough turn for the speed you
are traveling.
HOW TO AVOID THE HAZARD
Always ride at a slow speed when the ATV is
in four-wheel-drive differential gear lock, and
allow extra time and distance for maneuvers.
EBU28380
On-Command four-wheel-drive switch
"2WD"/"4WD"
This ATV is equipped with a switch to change from
two-wheel drive to four-wheel drive and vice-versa.
Select the appropriate drive according to the ter-
rain and the conditions.
G
"2WD" (two-wheel drive): Power is supplied to
the rear wheels.
4-6
WARNING
4