Removing A Wheel - Yamaha BIG BEAR 400 Owner's Manual

1. Tail/brake light bulb holder
2. Tail/brake light assembly
4. Remove the defective bulb by pushing it in
and turning it counterclockwise.
8
1. Tail/brake light bulb holder
2. Tail/brake light bulb
5. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
6. Install the bulb holder (together with the bulb)
by turning it clockwise.
7. Install the tail/brake light assembly by install-
ing the washers and the nuts.
8. Close the storage compartment.
EBU25650

Removing a wheel

1. Loosen the wheel nuts.
8-48