Replacing The Tail/Brake Light Bulb - Yamaha BIG BEAR 400 Owner's Manual

1. Headlight beam adjusting screw
EBU25631

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, replace it as
follows.
1. Open the storage compartment. (See page
4-20.)
2. Remove the tail/brake light assembly by re-
moving the nuts together with the washers.
1. Storage compartment
2. Nut
3. Remove the bulb holder (together with the
bulb) by turning it counterclockwise.
8-47
8