Replacing A Headlight Bulb - Yamaha BIG BEAR 400 Owner's Manual

2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
Specified fuses:
Main fuse:
30.0 A
Headlight fuse:
15.0 A
Ignition fuse:
15.0 A
Four-wheel-drive motor fuse:
10.0 A
Auxiliary DC jack fuse:
10.0 A
Carburetor warmer fuse:
10.0 A
EWB02151
WARNING
POTENTIAL HAZARD
Using an improper fuse.
WHAT CAN HAPPEN
An improper fuse can cause damage to the
electrical system, which could lead to a fire.
HOW TO AVOID THE HAZARD
Always use a fuse of the specified rating.
Never use a material in place of the proper
fuse.
3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
EBU28400

Replacing a headlight bulb

If a headlight bulb burns out, replace it as follows.
1. Disconnect the coupler shown.
2. Remove the headlight assembly by removing
the screws.
8-43
8