Handlebar Switches - Yamaha RAPTOR 700 Owner's Manual

EBU00530

Handlebar switches

1. Light switch "LIGHTS"
2. Engine stop switch "ENG. STOP"
3. Start switch "START"
1
2
3
EBU11560
Light switch "LIGHTS"
Set the switch to the "LO" position to turn on the
low beam and the taillight.
Set the switch to the "HI" position to turn on the
high beam and the taillight.
Set the switch to the "OFF" position to turn off all
of the lights.
cC
Do not use the headlights with the engine
turned off for more than thirty minutes. The
battery may discharge to the point that the
starter motor will not operate properly. If this
should happen, remove the battery and
recharge it.
4-4