Yamaha RAPTOR 700 Owner's Manual page 39

NOTE:
A special wrench can be obtained at a Yamaha
dealer to make this adjustment.
3. The length of the spring (installed) changes
1.5 mm (0.06 in) per turn of the adjusting nut.
Measurement A:
Installed length:
Minimum (hard):228 mm (9.0 in)
Standard:
Maximum (soft): 243 mm (9.6 in)
A. Spring length
236 mm (9.3 in)
A
4. Tighten the locknut to the specified torque.
Tightening torque:
42 Nm (4.2 m0kgf, 30 ft0lbf)
cC
Always tighten the locknut against the
adjusting nut and tighten it to the specified
torque.
4-17