Handlebar Switches; Throttle Lever - Yamaha RAPTOR EFI 110 2024 Owner's Manual

EBU18068

Handlebar switches

1
2
1. Engine stop switch " /
2. Start switch " "
EBU18081
Engine stop switch "
Set this switch to " " before starting the engine.
The engine stop switch controls the ignition and
stops the engine when it is running. Use this
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to " ".
"
/ "
EBU18102
Start switch " "
Push this switch to crank the engine with the start-
er. See the starting instructions on page 7-1 prior
to starting the engine.
EBU18286

Throttle lever

1. Throttle lever
Push the throttle lever to increase engine speed.
Spring tension returns the lever to the rest position
when released. Always check that the throttle le-
ver returns normally before starting the engine.
5-3
5
1