EBU11440
Drive chain slack check
NOTE:
Move the ATV back and forth and find the tight-
est position of the drive chain. Check and/or
adjust the chain slack while it is in this tightest
position.
To check the drive chain slack, all tires must be
touching the ground and there should be no weight
on it. Check the drive chain slack at the position
a. Drive chain slack
shown in the illustration Normal slack is approxi-
mately 25–35 mm (0.98–1.38in). If the slack
exceeds 35 mm (1.38 in), adjust it to specification.
8-38