NOTE:
To access the rear brake fluid reservoir cap,
remove the seat (see page 4-13), remove the
cowling bolt and quick fastener, and then pull
the cowling slightly outward as shown.
1. Quick fastener
1
2
2. Bolt
1. Cowling
Observe these precautions:
8 When checking the brake fluid level, make
sure the top of the brake fluid reservoir is
level.
8 Use only the designated quality brake fluid,
otherwise, the rubber seals may deteriorate,
causing leakage and poor brake performance.
Recommended brake fluid:
8 Refill with the same type of brake fluid. Mixing
fluids may result in a harmful chemical reac-
tion and lead to poor brake performance.
8-29
1
2
2. Reservoir tank cap
DOT 4