Adjusting The Rear Brake Light Switch - Yamaha RAPTOR 700 Owner's Manual

EBU08330

Adjusting the rear brake light switch

The rear brake light switch, which is activated by
the brake pedal and brake lever, is properly
adjusted when the brake light comes on just
before braking takes effect. If necessary, adjust
the brake light switch as follows.
Turn the adjusting nut while holding the rear
brake light switch in place. To make the brake
light come on earlier, turn the adjusting nut in
direction a. To make the brake light come on
later, turn the adjusting nut in direction b.
1. Rear brake light switch
.
8-35
1
2
a b
2. Adjusting nut