Air Filter Element Cleaning - Yamaha RAPTOR 700 Owner's Manual

3. Install the spark plug and tighten it to the
specified torque.
Tightening torque:
Spark plug:
12.5 Nm (1.25 m0kgf, 9.1 ft0lbf)
NOTE:
If a torque wrench is not available when you are
installing a spark plug, a good estimate of the
correct torque is 1/4 to 1/2 turn past finger tight.
Have the spark plug tightened to the specified
torque as soon as possible.
4. Install the spark plug cap.
EBU15800

Air filter element cleaning

NOTE:
There is a check hose at the bottom of the air fil-
ter case. If dust or water collects in this hose,
empty the hose and clean the air filter element
and air filter case.
1. Check hose
1. Remove the seat. (See page 4-13 for seat
removal and installation procedures.)
8-19
1